Version 1.03
1. Change Default Value of USB Speed(Auto -> Full)

Version 1.04
1.Change Default Value of USB Speed(Auto -> Full)
3.Fixed the problem that the chance of misjudgment to Over Ipeak Current when the power is turned on.

Version 1.07
1.Added Function of V Unit(TRI, ARB) .
2.Added Function of Power Limit.
3.Change Default Value of Ipk Limit(OFF -> ON).
4.Change Default Value of IRMS Limit (OFF -> ON).
5.The USB Speed setting value is fixed as Full Speed
6.Added Record Setting of MISC and MeasItem1~3 in Preset Memory.
7.Modified Default Value of ARB1 ~ ARB16
8.Modified Default Value of SEQ6 ~ SEQ9
9.Change the Name of Ipkh CLR to IPK CLR.
10.Added Hotkey of IPK CLR.
11.Modified the Operation Screen of SEQ/SIM

Version 1.12
1.Change the function of Default Setting(add to execute the function of Delete All Data)
2.Change the setting range of IPK Limit
3.Reduce zero measurement error (re-calibration required)

Version 1.15
1.Fixed the problem that when the Buzzer is set to OFF, the machine will have an alarm sound when the alarm occurs.
2.Fixed the problem of Simulate data communication with PC software
3.Correct the calculation error of calibrating the internal capacitance
4.After change Range, limit the Ipeak and Irms settings to the maximum
5.Corrected the synchronization problem between waveform and AVC in ON phase
6.Fix the Irms limitation issue in AC-Ext, AC+DC-Ext mode

Version 1.17
1.Fix the SN problem of USB devices.

Version 1.19
1.Fix the problem of outputting positive voltage in DC Mode and Limit condition, with outputting negative voltage when Output OFF
2.Correct the Cal Error, the zero point correction problem of the initialization correction.
3.When Output OFF is added, the Output current pulling is zero
4.Fix the problem of SYSTEM ERR(4).
