Rigol M300
854,05 €*
% 899,00 €* (5%)Bestellware, Lieferzeit auf Anfrage
USB-, Ethernet- und GPIB Schnittstelle
Lieferumfang: UltraAcquire Software, Netzkabel, USB-Kabel
| Kanäle analog: | 20 bis 320 |
|---|---|
| Produktserie: | Rigol-M300 |
Zubehör
Rigol MC3065
Rigol MC3065
- DMM module
- Used to measure the signal
- 6½ digits
- Support the following functions: DCV, ACV, DCI, ACI, 2WR, 4WR, FREQ, PERIOD, TEMP and any sensor
- After connecting the DMM module, make sure that the signal under test connected to the analog bus is no greater than 300 Vdc or 300 Vrms
Rigol MC3120
Lieferumfang: MUX20 Module
Rigol MC3120
- 20-channel multiplexer
- All 20 channels switch both HI and LO inputs
- Support 4-wire measurement
- The signal to be tested is connected through the TB20 terminal box
- Can be connected with MC3065
Rigol MC3132
Rigol MC3132
- 32-channel multiplexer
- All 32 channels switch both HI and LO inputs
- Support 4-wire measurement
- The signal to be tested is connected through the TB32 terminal box
- Can be connected with MC3065
Rigol MC3164
Rigol MC3164
- 64-channel single-ended multiplexer
- All 64 channels can switch HI input only
- Doesn’t support 4-wire measurement
- The signal to be tested is connected through the TB64 terminal box
- Can be connected with MC3065
Rigol MC3324
Rigol MC3324
- Mix multiplexer with 20 voltage channels and 4 current channels
- All 20 voltage channels switch both HI and LO inputs
- 20 voltage channels support 4-wire measurement
- 4 current channels are used to measure DC current or AC current
- The signal to be tested is connected through the TB24 terminal box
- Can be connected with MC3065
Rigol MC3416
Rigol MC3416
- 16-channel actuator
- Can connect signal to the device under test or enable external device
- Any of the 16 channels can switch to Normally-Open (NO) and Normally-Closed (NC) states
- The signal is connected through the TB16 terminal box
Rigol MC3534
Rigol MC3534
- Multifunction module
- DIO: four 8-bit digital input/output ports
- TOT: four totalizer input terminals
- DAC: four analog output terminals
- The signal is connected through the TB34 terminal box
Rigol MC3648
Rigol MC3648
- 4×8 two-wire matrix switch
- used to connect multiple devices to multiple points on the device under test
- 32 two-wire cross points which can connect any combination of inputs and outputs at the same time
- The signal is connected through the TB48 terminal box
Rigol M3TB20
Lieferumfang: 20 channel MUX Terminal Box
